Water Powered battery
Step 1: Meterials You Will Need
You will need:- A Calculator
- Carbon Rod/ Copper Rod
- A 1x1 Inch Aluminum Foil
- A Small Cylindrical Container
- Two 3 Inch Wire
- Multi Purpose Pliers
- Glue Gun
Step 2: Making Some Holes
Use a drill or a pointy object to make some holes located on the bottom and lower side.Step 3: Adding The Carbon Rod (Positive)
Glue the carbon rod in place as the positive rod. The carbon rod is from a used AA battery.Warning: Never open alkaline "it is messy".
Step 4: Adding The Foil (Negative)
Glue the foil in place as the negative plate.Step 5: Connect The Water 's Wires
Connect
the wire of the water battery, and glue it so it won't leak. Positive
wire connected to carbon rod while negative is connected to the foil /
zinc.
Step 7: Connect The Water Battery To The Calculator
Connect the water battery to the calculator. The carbon rod is positive while the aluminum is negative. Be sure to disconnect the solar panel.Step 8: Assemble It Again
Put it back together again.Step 9: Fill The Water Battery
Liquid Rating:Water - Good
Water With Salt - Better
Vinegar - Best
Comments
Post a Comment